Looking for full-time employment in the domain of Mechanical Engineering

Mr. Jaydeep  looking for full-time employment in the domain of Mechanical Engineering.

Mr. Jaydeep doing an internship at L&T electrical and automation, Powai as a part of the completion of his M-Tech thesis project and handling different projects in the domain of Design, FEA, CFD within the industry. His academics are excellent as well.

1. Won 2nd prize in “Quiz Competition” held in REFLEX 2k15 held on 6th march 2015
at Ashokrao Mane Group of Institutions, Wathar.
2. Won 2nd prize in “State Level Drama Competition” held at Ashokrao Mane Group of
Institutions, Wathar, on 9th March 2015.
3. Got selected and have been approved for the mega project by “OPULENT PVT.
LTD.”, Pune for the academic year 2017-18
4. Presented and awarded “Best Paper Presentation” for the paper entitled “Zeolite
Adsorption Refrigeration System”, at Department of Mechanical Engineering,
Tatyasaheb Kore Institute of Engineering and Technology, Warananagar on 19th
September 2016.
5. Served as a representative for Second Year engineering students

1. Member of First Year Engineering Students Association (FESA), a departmental
organization, in the year 2014-15.
2. Member of Mechanical Engineering Students Association (MESA), a departmental
organization, in the year 2015-16 and 2016-17 consecutively.
3. Member of the college central library committee for the year 2015-16.
4. Departmental Coordinator for ‘JIDNYASA 2K15’, a national level paper presentation
held at Tatyasaheb Kore Institute of Engineering And Technology, Warananagar.
5. Coordinator for intercollege level event, “MECHMANIA 2k17” held at Tatyasaheb
Kore Institute of Engineering and Technology, Warananagar.
6. Committee member for college magazine ‘HORIZON’ for the year 2016-17.
7. Active NSS member for the years 2015-16 and 2016-17 respectively.

1. Attended a workshop on “Soft Skills Development” by Miss. Sneha Waghatkar held
at Tatyasaheb Kore Institute of Engineering and Technology from 7th Feb. 2015 to 22nd
Feb. 2015.
2. Attended a workshop on “Personality Development” by Miss. Sneha Waghatkar held
at Tatyasaheb Kore Institute of Engineering and Technology from 29th June 2015 to 3rd
July 2015.
3. Attended a workshop on “Aptitude Test” by FACE Academy, Mr. Akash Pahurkar
held at Tatyasaheb Kore Institute of Engineering and Technology from 3rd January to
10th January 2016.
4. Attended a two-month long course on “CATIA V5 & CAD” at Knowtran
Technologies, Kolhapur during November and December 2016.
5. A Hands-on Introduction to Engineering Simulations, by Cornell university (ANSYS,
6. Coursera course –
a) Machine Design Part I by Georgia Institute of Technology, United States.
b) Introduction to Programming with MATLAB, Vanderbilt University.
c) Introduction to CAD, CAM, and Practical CNC Machining, by Autodesk.
d) Neural network and deep learning
e) Engineering Project Management: Initiating and Planning by Rice University
f) Programming for Everybody (Getting Started with Python), by University of

Title: Electricity Generation by using Shock Absorption.
Description: This mini project was done by a group of 5 members. In this, we tested for the
probability of producing electricity from a shock wave absorbed by the shock absorbers of the
vehicle. A prototype was designed by using shock absorber, LED and Transducer which tested
for the amount of the electricity produced when received a shock or when it was pressed.

Title: Computer simulstion of aircraft refrigeration system
Description: We performed the mathematical modeling and simulation of the aircraft
refrigeration systems also crated software. This mega project helps to understand the factor
affecting on the air craft refrigeration system. Validation of results obtain from theoretical
concepts. This software helps us to select the effective refrigeration system by considering the
various parameter such as compressor efficiency, turbine efficiency, effectiveness of heat
exchanger, compression ratio etc. And I am the leader of my team.
Duration: 1 year.
MTech. final year project is started at L&T Electrical and Automation, Mumbai.
Title: Seismic and structural simulation of LV/MV switchgear using numerical
simulation tool.
Description: This study focuses on the formation of equivalent 1D and 2D finite element model
from the 3D geometry of main distribution board panel. The response spectrum analysis has
been conducted by obtaining the natural frequency, mode shape and giving the input in terms
of response spectrum acceleration. The purpose of this study is to investigate the stability of
panels under seismic loading conditions. A 1D and 2D finite element modeling simulation
reduces the time required for a 3D situation and experiments.
Company & Department- L&T electrical and automation, SDDC, (300202304), Powai
Reported to- Mr. Amol kale.

• Microsoft Word, Excel and Power point
• Creo
• Ansys, CFD, Ansys fluent
• Minitab
• Solid work, Autodesk Inventor
• Familiar with basics of Python and C++
• Familiar with basics of Fusion 360 software

1. Reverse engineering along with two case study
2. Prandtal membrane analogy for non-circular shaft
3. Wear and friction in bearing- oxidation and corrosive wear
4. Vibration analysis of centrifugal pump- FFT, SVM, ANN
5. Case study of abrasive wear behaviour of sic and aluminium material

• Capability to adapt to any type of situation quickly
• Incessant Learner.
• Effective stress handler and Goal Oriented.
• Confidence to complete any task given to me.
• Self-motivated.
• Hard worker
• Quality to lead the way

• I like to play a kho-kho. I am the captain of my team during my high school
• Social service (part of Avani sansthan)
• I like to write the motivational stories some of them I published in the magazine of
my college.
• I love the acting and I participate in state level competition.

Organization- Anjali T. Precision
Address- Nehru nagar, Pimpri, Dist- Pune.
Duration – 1 month
Description- Got to know and learn about various machines such as CNC, VMC, Five Station
Drilling Machine, etc. Learnt the working of Profile projector, air gauge, surface finish tester,
height master. Also got to learn the design and manufacturing of various components such as
piston for pump, leaf and suspension pin, hydraulic sleeve. This was a good experience to know
how the practically thing is handled in the industry.

Please contact us for more details.
Email: info@rosefieldb2b.com
Mobile: 9892795541 / 9920517232